Standard Line
Double waterproof, EN 511 3-2-1. The reference glove for laboratory LN2 work.
Shop Standard →Cryogenic Gloves Guide: Standard vs Extra Grip vs Oil & Gas
Cryogenic gloves guide
Cryogenic Gloves Guide: Standard vs Extra Grip vs Oil & Gas
Three glove lines, five lengths, two certified EN 511 ratings. This guide helps you choose by task, length and size, with the certified data side by side.
- Standard: EN 511 3-2-1
- Extra Grip: EN 511 3-3-1
- 33 to 68 cm
- S/M · M/L · L/XL
Compare the lines
Standard vs Extra Grip vs Oil & Gas
| Standard Line | Extra Grip Line | Oil & Gas | |
|---|---|---|---|
| EN 511 (convective · contact · water) | 3 · 2 · 1 | 3 · 3 · 1 | — |
| EN 388 (mechanical) | 2222X | 2222X | — |
| Certified by | CTC, notified body 0075 | Intertek | — |
| Palm | Standard | Black grip coating | Reinforced / leather |
| Best for | Labs, biobanks, sampling | Pipes, valves, hoses, heavy handling | Industrial LN2 supply, workshops |
| Lengths | 33 · 38 · 48 · 58 · 68 cm | 33 · 38 · 48 · 58 · 68 cm | 48 cm · long cuff |
EN 511 rates convective cold and contact cold from 0 to 4 and water penetration 0 or 1. Contact cold level 3 on the Extra Grip line is one level above the Standard line.
Choose the length
How far up the arm can the splash reach?
| Length | Code | Coverage | Typical task |
|---|---|---|---|
| 33 cm | WR | Hand and wrist | Vials, racks, precision work |
| 38 cm | MA | Hand + mid forearm | Freezer retrieval, small dewars |
| 48 cm | BEB | Forearm to below the elbow | Filling and dispensing from dewars |
| 58 cm | EB | Full forearm to the elbow | Transfer lines, tanker unloading |
| 68 cm | SH | Full arm to the shoulder | Reaching into large tanks |
Choose the size
Measure the width of your palm
| Size | Palm width |
|---|---|
| S/M | 13 cm |
| M/L | 15 cm |
| L/XL | 17 cm |
Cryogenic gloves should fit loosely so they can be removed quickly if liquid gets inside.
FAQ
Cryogenic gloves: frequently asked questions
What does EN 511 3-3-1 mean?
Each digit is a separate test: convective cold (0-4), contact cold (0-4) and water penetration (0-1). 3-3-1 means high insulation, contact cold level 3 and a waterproof glove.
Are cryogenic gloves suitable for immersion?
No. They protect against splashes and short contact with cold surfaces, never immersion.
Is there a US cryogenic glove standard?
OSHA 29 CFR 1910.138 requires gloves selected for temperature extremes but does not set a cryogenic test. EN 511 is the internationally recognized test for cold protection.
Which line should I choose?
Labs and biobanks: Standard. Pipes, valves and heavy handling: Extra Grip. LN2 supply and workshops: Oil & Gas.
Not sure which glove fits your task?
Tell us the task and we recommend line, length and size.